Home > Exhibition > Content
Fasteners and screw threads
Nov 08, 2016

ISO Standards Handbook:
 Fasteners and screw threads
 Volume 2: Product standards
 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8
 Contents
 Part 3 : Product standards
 3.1 External drive hexagon head bolts and screws
 ISO 4014:1999 Hexagon head bolts — Product grades A and B
 ISO 4015:1979 Hexagon head bolts — Product grade B — Reduced shank (shank diameter
 approximately equal to pitch diameter)
 ISO 4016:1999 Hexagon head bolts — Product grade C
 ISO 4017:1999 Hexagon head screws — Product grades A and B
 ISO 4018:1999 Hexagon head screws — Product grade C
 ISO 4162:1990 Hexagon flange bolts — Small series
 ISO 7411:1984 Hexagon bolts for high-strength structural bolting with large width across flats
 (thread lengths according to ISO 888) — Product grade C — Property
 classes 8.8 and 10.9
 ISO 7412:1984 Hexagon bolts for high-strength structural bolting with large width across flats
 (short thread length) — Product grade C — Property classes 8.8 and 10.9
 ISO 8676:1999 Hexagon head screws with metric fine pitch thread — Product grades A and B
 ISO 8765:1999 Hexagon head bolts with metric fine pitch thread — Product grades A and B
 ISO 15071:1999 Hexagon bolts with flange — Small series — Product grade A
 ISO 15072:1999 Hexagon bolts with flange with metric fine pitch thread — Small series —
 Product grade A
 3.2 Square neck bolts
 ISO 8677:1986 Cup head square neck bolts with large head — Product grade C
 ISO 8678:1988 Cup head square neck bolts with small head and short neck — Product grade B

3.3 Hexagon socket head screws
 ISO 4762:1997 Hexagon socket head cap screws
 ISO 7379:1983 Hexagon socket head shoulder screws
 ISO 7380:1997 Hexagon socket button head screws
 Fasteners and screw threads, Ed. 5, Vol. 2 Page 2 of 6
 ISO 10642:1997 Hexagon socket countersunk head screws
 3.4 Hexalobular socket head screws
 ISO 14579:2001 Hexalobular socket head cap screws
 ISO 14580:2001 Hexalobular socket cheese head screws
 ISO 14583:2001 Hexalobular socket pan head screws
 ISO 14584:2001 Hexalobular socket raised countersunk head screws
 3.5 Slotted head screws
 ISO 1207:1992 Slotted cheese head screws — Product grade A
 ISO 1580:1994 Slotted pan head screws — Product grade A
 ISO 2009:1994 Slotted countersunk flat head screws (common head style) — Product grade A
 ISO 2010:1994 Countersunk slotted raised head screws (common head style) — Product
 grade A
 ISO 7048:1998 Cross recessed cheese head screws
 3.6 Cross-recessed head screws
 ISO 7045:1994 Pan head screws with type H or type Z cross recess — Product grade A
 ISO 7046-1:1994 Countersunk flat head screws (common head style) with type H or type Z cross
 recess — Product grade A — Part 1: Steel of property class 4.8
 ISO 7046-2:1990 Cross-recessed countersunk flat head screws (common head style) — Grade A
 — Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals
 ISO 7047:1994 Countersunk raised head screws (common head style) with type H or type Z
 cross recess — Product grade A
 3.7 Screw and washer assemblies
 ISO 10644:1998 Screw and washer assemblies with plain washers — Washer hardness classes
 200 HV and 300 HV
 3.8 Set screws
 ISO 2342:1972 Slotted headless screws — Metric series
 ISO 4026:1993 Hexagon socket set screws with flat point
 ISO 4027:1993 Hexagon socket set screws with cone point
 ISO 4028:1993 Hexagon socket set screws with dog point
 ISO 4029:1993 Hexagon socket set screws with cup point
 ISO 4766:1983 Slotted set screws with flat point
 ISO 7434:1983 Slotted set screws with cone point
 ISO 7435:1983 Slotted set screws with long dog point
 ISO 7436:1983 Slotted set screws with cup point
 Fasteners and screw threads, Ed. 5, Vol. 2 Page 3 of 6
 3.9 Weld studs
 ISO 13918:1998 Welding — Studs and ceramic ferrules for arc stud welding
 3.10 Tapping screws
 ISO 1479:1983 Hexagon head tapping screws
 ISO 1481:1983 Slotted pan head tapping screws
 ISO 1482:1983 Slotted countersunk (flat) head tapping screws (common head style)
 ISO 1483:1983 Slotted raised countersunk (oval) head tapping screws (common head style)
 ISO 7049:1983 Cross recessed pan head tapping screws
 ISO 7050:1983 Cross recessed countersunk (flat) head tapping screws (common head style)
 ISO 7051:1983 Cross recessed raised countersunk (oval) head tapping screws
 ISO 7053:1992 Hexagon washer head tapping screws
 ISO 10509:1992 Hexagon flange head tapping screws
 ISO 10510:1999 Tapping screw and washer assemblies with plain washers
 ISO 14585:2001 Hexalobular socket pan head tapping screws
 ISO 14586:2001 Hexalobular socket countersunk head tapping screws
 ISO 14587:2001 Hexalobular socket raised countersunk (oval) head tapping screws
 3.11 Drilling screws
 ISO 15480:1999 Hexagon washer head drilling screws with tapping screw thread
 ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
 ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread
 ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping
 screw thread
 3.12 Hexagon nuts
 ISO 4032:1999 Hexagon nuts, style 1 — Product grades A and B
 ISO 4033:1999 Hexagon nuts, style 2 — Product grades A and B
 ISO 4034:1999 Hexagon nuts — Product grade C
 ISO 4035:1999 Hexagon thin nuts (chamfered) — Product grades A and B
 ISO 4036:1999 Hexagon thin nuts (unchamfered) — Product grade B
 ISO 4161:1999 Hexagon nuts with flange — Coarse thread
 ISO 4775:1984 Hexagon nuts for high-strength structural bolting with large width across flats —
 Product grade B — Property classes 8 and 10
 ISO 7413:1984 Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize
 tapped) — Product grades A and B — Property classes 5, 6 and 8
 ISO 7414:1984 Hexagon nuts for structural bolting with large width across flats, style 1 —
 Product grade B — Property class 10
 ISO 7417:1984 Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize
 Fasteners and screw threads, Ed. 5, Vol. 2 Page 4 of 6
 tapped) — Product grade A — Property class 9
 ISO 8673:1999 Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B
 ISO 8674:1999 Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B
 ISO 8675:1999 Hexagon thin nuts (chamfered) with metric fine pitch thread — Product
 grades A and B
 ISO 10663:1999 Hexagon nuts with flange — Fine pitch thread
 3.13 Prevailing torque type nuts
 ISO 7040:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 —
 Property classes 5, 8 and 10
 ISO 7041:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 —
 Property classes 9 and 12
 ISO 7042:1997 Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8,
 10 and 12
 ISO 7043:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) —
 Product grades A and B
 ISO 7044:1997 Prevailing torque type all-metal hexagon nuts with flange — Product grades A
 and B
 ISO 7719:1997 Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8
 and 10
 ISO 7720:1997 Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9
 ISO 10511:1997 Prevailing torque type hexagon thin nuts (with non-metallic insert)
 ISO 10512:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with
 metric fine pitch thread — Property classes 6, 8 and 10
 ISO 10513:1997 Prevailing torque type all-metal hexagon nuts, with metric fine pitch thread —
 Property classes 8, 10 and 12
 ISO 12125:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with
 metric fine pitch thread — Product grades A and B
 ISO 12126:1997 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch
 thread — Product grades A and B
 3.14 Washers
 ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes —
 General plan
 ISO 7089:2000 Plain washers — Normal series — Product grade A
 ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A
 ISO 7091:2000 Plain washers — Normal series — Product grade C
 ISO 7092:2000 Plain washers — Small series — Product grade A
 ISO 7093-1:2000 Plain washers — Large series — Part 1: Product grade A
 ISO 7093-2:2000 Plain washers — Large series — Part 2: Product grade C
 ISO 7094:2000 Plain washers — Extra large series — Product grade C
 Fasteners and screw threads, Ed. 5, Vol. 2 Page 5 of 6
 ISO 7094:2000 /
 Cor.1:2000
 Technical Corrigendum 1:2000 to ISO 7094:2000

ISO 7415:1984 Plain washers for high-strength structural bolting, hardened and tempered
 ISO 7416:1984 Plain washers, chamfered, hardened and tempered for high-strength
 structural bolting
 ISO 8738:1986 Plain washers for clevis pins — Product grade A
 ISO 10669:1999 Plain washers for tapping screw and washer assemblies — Normal and large
 series — Product grade A
 ISO 10673:1998 Plain washers for screw and washer assemblies — Small, normal and large
 series — Product grade A
 3.15 Pins
 ISO 1234:1997 Split pins
 ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
 ISO 2339:1986 Taper pins, unhardened
 ISO 2340:1986 Clevis pins without head
 ISO 2341:1986 Clevis pins with head
 ISO 8733:1997 Parallel pins with internal thread, of unhardened steel and austenitic
 stainless steel
 ISO 8734:1997 Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
 ISO 8735:1997 Parallel pins with internal thread, of hardened steel or martensitic stainless steel
 ISO 8736:1986 Taper pins with internal thread, unhardened
 ISO 8737:1986 Taper pins with external thread, unhardened
 ISO 8739:1997 Grooved pins — Full-length parallel grooved, with pilot
 ISO 8740:1997 Grooved pins — Full length parallel grooved, with chamfer
 ISO 8741:1997 Grooved pins — Half-length reverse taper grooved
 ISO 8742:1997 Grooved pins — One-third-length centre grooved
 ISO 8743:1997 Grooved pins — Half-length centre grooved
 ISO 8744:1997 Grooved pins — Full-length taper grooved
 ISO 8745:1997 Grooved pins — Half-length taper grooved
 ISO 8746:1997 Grooved pins with round head
 ISO 8747:1997 Grooved pins with countersunk head
 ISO 8748:1997 Spring-type straight pins — Coiled, heavy duty
 ISO 8750:1997 Spring-type straight pins — Coiled, standard duty
 ISO 8751:1997 Spring-type straight pins — Coiled, light duty
 ISO 8752:1997 Spring-type straight pins — Slotted, heavy duty
 ISO 13337:1997 Spring-type straight pins — Slotted, light duty
 Fasteners and screw threads, Ed. 5, Vol. 2 Page 6 of 6
 3.16 Rivets
 ISO 1051:1999 Rivet shank diameters
 ISO 14588:2000 Blind rivets — Terminology and definitions
 ISO 14589:2000 Blind rivets — Mechanical testing
 ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head — AlA/St
 ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head — AlA/St