Home > Exhibition > Content
Metal stamping parts of their different characteristics and scope of use
Aug 22, 2016

Metal stamping is the requirement of bending: bending shape should be symmetric bending radius cannot be less than the minimum allowable bending radius. Curved too short is not easy to shape, should be made more curved side of the straight part of the H>2 Delta. If h is very short, you may need to make appropriate allowances with increasing h, bent well, then cut away the increase in metals. Metal stamping parts should be simple, symmetric shape, the depth should not be too large. In order to minimize the drawing number, easily forming.

Corner radius of a metal stamping parts in case of not increasing process. It will increase the number of deep drawing and plastic, also increasing number die, and prone to waste and the increase in rate of metal stamping parts using mold is put down the stripper plate and fixed the stripper plate is used, depending on the stripping force size, which material thickness is the main consideration. With the enhancement of elastic components for mold stretch (such as rectangular spring), leaned the stripper plate discharge power is greatly enhanced. Metal stamping parts is by press and mold plates, strips, tubes and profiles, such as force, to produce plastic deformation or separation, so as to obtain the desired shape and size of the workpiece (stampings) processing method.